EnviroEnergy Solutions Inc.
will solve your toughest air pollution problems
Our company is based on the belief that our customers' needs are of the utmost importance. Our entire team is committed to meeting those needs. As a result, a high percentage of our business is from repeat customers and referrals.
- Opacity from the PM 2,5 and acid mist (Blue haze) will be minimized to near 0.
- Diesel smoke removal by Electrostatic Precipitation with low pressure losses.
- Heavy metals, Mercury, Dioxins/Furans will be removed with efficiency 99.9%.
- Condensible VOC (oil smoke) will be all removed and collected for reuse.
- Odor control with chemical oxidation and activated carbon technologies.
- Non-catalytic low temperature NOx removal technology, SO2 scrubbing.
- Gas quench and scrubbing of Acid gases for High temperature exhaust systems.
- Dust control and Material Recovery systems for precious metals.
Custom built systems for any proprietary process and many more
Our equipment is self- cleaning with minimum maintenance. Demonstration units are available per your request. We would welcome the opportunity to earn your trust and deliver you the best service in the industry.
Our Company will provide for your plant custom built High efficiency abrasion resistant Cyclonic Separators complete with the Discharge Gate Dampers and collecting hoppers, Hot gas Quenchers, Low energy single or multistage Rod -Venturi Scrubbers, High energy Venturi Scrubbers, Pack towers for gas absorption, Marble Bed Scrubbers, Wet Electrostatic Precipitators (WESP or WET ESP) as a stand-alone unit or as a mist eliminator downstream from the low energy scrubbers such as Rod-Deck or Marble Bed.
By installing upstream of the scrubber our high efficiency cyclonic separators we can substantially reduce the amount of solids in the recycling liquid and increase the reliability of air cleaning equipment. This approach is even more important when Material Recovery System is combined with air cleaning equipment and recovered material prefers to be in the dry state.
For the removal of hot oil smoke from industrial exhaust where also present solid particles such as lint in the textile applications the best solution is a combination of low energy scrubber followed by the WESP.
When recovery of clean oil without water is required or oil already in the state of the mist droplets we are using our high efficiency two-stage oil mist ESP. For the treatment of hot exhausts with high moisture content we have developed self-cleaning, condensing WESP where collecting surface is being cooled by cold water and water vapor from the hot gas is creating continuous liquid film that is providing self-cleaning.
To improve the efficiency of the existing Air Pollution Control Systems, we are using our proprietary technology for Rebuilding and updating customers' equipment most of the time, replacing High energy Venturi Scrubbers with the combination of low pressure drop scrubbers and wet electrostatic mist eliminators.
For the removal of submicron particles of soot and other toxic particles from Diesel engines we are using our compact horizontal ESP with high level of Cold or Non-Thermal Plasma discharge that at the same time is providing the removal of CO, NOX and hydrocarbons.
Industrial Applications for the EnviroEnergy Solutions Inc.
Equipment and the Type of Pollutants It Is Capable of Removing
Industrial Processes and Air Pollution Control Equipment By EnviroEnergy Solutions, Inc
Some Industrial Applications for EnviroEnergy Solutions Wet ESP System